resistance to impact
英 [rɪˈzɪstəns tu ˈɪmpækt]
美 [rɪˈzɪstəns tu ˈɪmpækt]
网络 耐冲击强度
双语例句
- The coating has properties of excellent adhesion, good mechanism performance. Good flexibility, good resistance to impact, good abrasion resistance.
具有极强的附着力和优良的机械物理性能，柔韧性好、抗冲击强度高，耐磨性能强。 - Dissolve deposited metal has low hardness and high toughness, heat corrosion resistance to impact abrasion.
溶敷金属具有低硬度高韧性，可耐热耐腐蚀耐冲击磨耗。 - Preparation and Characterization of Lightweight and Higher Resistance to Impact Epoxy Encapsulating Materials
轻质抗冲击环氧灌封材料的制备与表征 - Calculation on Grains Starting Conditions and Gradient of Resistance to Impact and Erosion of Slope on Embayment Roadbed in Mountainous Area
山区河湾路基边坡颗粒起动条件与抗冲刷坡度计算 - Features: high mechanical strength, good resistance to creep properties, even in low temperature and are of very high resistance to impact strength;
特性：机械强度高、耐蠕变性能好、即使在低温下，具有非常高的抗冲击强度； - The framework materials must satisfy with fatigue resistance, resistance to impact, resistance to deformation for tires.
骨架材料应满足轮胎所需的耐疲劳、耐冲击、抗变形等性能要求； - Currently, domestic hot-shear blade is mainly made of integral high-alloy steel. Hardness was lowered in pursuit of high resistance to impact, causing lack of hot strength and poor high-temperature wear performance, and finally resulted to low service life.
目前国内的热剪刃主要是由整体高合金钢制造，为了追求耐冲击性能，而降低了硬度，造成工作热强度不足，高温磨损性能差，导致使用寿命低； - This paper developed three kinds of recipes for epoxy resin coating and analyzed their resistance to impact erosion-wear.
配制了3种环氧树脂涂层配方，测试其耐冲蚀磨损性能。 - ABFB has characteristics of steady running and powerful resistance to impact load, so it is a kind of advanced technology in wastewater treatment.
ABFB具有运行稳定、抗冲击负荷强的特点，是一种先进的水处理技术。 - The hardening of computer commonly includes the reinforce of electromagnetic compatibility, resistance to vibration; resistance to impact, tri-proof ( antiseptic, mild proof and resistance to the salt fog, etc).
计算机加固通常包括电磁兼容性加固、抗振动冲击性加固、高低温性加固、三防（防腐、防霉、抗盐雾）加固等。 - The roughness of coating may reach over 0.8, which bears wear-resisting, pressure resistance, resistance to impact, resistance to bend, and high erosion resistance, can be used in manufacturing and over-repairing single prop form mine.
涂层粗糙度可达到0.8以上，其耐磨、耐压、抗冲击、抗弯曲、抗腐蚀性极高，可用于矿用单体支柱制造和大修。 - The effect of nitrile rubber, adhesive contents and fiber content on the resistance to impact of fiber reinforced fractional materials was studied.
主要研究了丁腈橡胶形态、粘结剂含量及混杂纤维含量对混杂纤维增强摩阻材料冲击性能的影响。 - The study of resistance to impact of fiber reinforced fractional materials
纤维增强摩阻材料的冲击性能研究 - The experiment and research results show that the resistance to impact and abrasive resistance of PSCU are better than that of sulphur coated urea ( SCU).
试验结果表明，PSCU在抗冲击性和耐磨性上均明显优于硫包尿素（简称SCU）； - It is indicated that retained austenite in microstructure can inhibit the initiation and propagation of fatigue crack, improve the resistance to impact fatigue and decrease impact fatigue wear.
试验得出，残余奥氏体可阻止疲劳裂纹的萌生和扩展，提高冲击疲劳抗力，降低冲击疲劳磨损。 - Resistance to impact erosion-wear of epoxy resin coatings
环氧树脂涂层的耐冲蚀磨损性能 - The effect of SiO_2 nanoparticle content and reaction method on coating film hardness, adhesion, resistance to impact, thermal stability was studied.
研究了纳米粒子的加入量和加入方式对涂料硬度、附着力、抗冲击能力、耐候性、热稳定性能的影响。 - Both manufacturers and users are giving their more attention to the shock resistance of products nowadays, which is a important constituent of its reliability, and shock testing is a indispensable means of checking resistance to impact.
抗冲击性能作为产品可靠性的重要组成部分，现在已备受产品生产者和使用者的关注。冲击试验则是测试产品抗冲击性能的一个重要手段。 - The problem of resistance to impact for electronic system must be resolved when we measured energy-penetrating of electronic system.
依靠电子系统完成动能侵彻过程测量，必须解决电子系统的抗冲击防护问题。 - On the basis of workability experiment, the plasticity experiment studies the effect of sepiolite on the cementation strength, folding strength, resistance to impact tenacity, which shows that cement stone has little effect on the early strength.
对抗压强度的影响不大。在施工性能实验的基础上，塑性实验主要考察了海泡石的加入对水泥浆体系胶结强度、抗折强度、抗冲击韧性的影响情况。 - However, in a long time, the toughness and resistance to impact are not satisfactory because metal Ni can't wet TiC and TiN completely, its applications are limited.
但是长期以来，山于金属Ni不能完全润湿TiC和TiN，致使合金韧性不足，抗冲击性能较差，限制了其应用。 - Research of Defense of Resistance to Impact Technology for Energy-penetrating Electronic System
动能侵彻电子系统抗冲击防护技术研究 - The steel fiber reinforced concrete ( SFRC) has a higher tensile strength, bending strength, resistance to fracture, ductility and resistance to impact compared with normal concrete, which the concept of the concrete being the brittle material may be changed.
钢纤维混凝土显著提高混凝土材料原有的抗拉、抗弯强度和断裂延伸率，特别是提高了混凝土的韧性和抗冲击性，从而极大改变了混凝土原来一直作为脆性材料的概念。 - PC/ ABS alloy is a kind of high performance engineering plastics. Because of its good processability and excellent resistance to impact, it has been widely used in the areas of production and daily life.
PC/ABS合金是一种性能优良的工程塑料，由于其有良好的加工性能、优良的抗冲击性能，因此在生产和生活各个领域中得到了广泛的应用。 - The cured film cured at room temperature has a good glossiness, hardness, adhesion and good resistance to impact.
常温下固化液体环氧树脂，涂膜具有良好的光泽度、硬度、柔韧性、附着力及抗冲击性能。 - With a series of good performance, such as the small density, high strength ratio and rigidity ratio, good resistance to impact, corrosion and wear, high recycle etc., the al-alloy is thought to be the optimum material for lighter cars.
由于铝合金具有一系列优良性能，如密度小、比强度和比刚度高、抗冲击性良好、耐腐蚀、耐磨及高的再生性等，被认为是实现轿车轻量化的首选材料。 - A new type of lattice sandwich structure& the sandwich structure with discontinuous cross-lattice-core has been put forward by Wang Bo, which has excellent mechanical properties, such as weight light, resistance to impact, and it is easy to process and design.
由王博提出了一种新型的点阵夹层结构&不连续十字型点阵夹层结构，具有轻质、抗冲击等优异性能，同时兼有易加工、可设计性强等特点。 - Thickness of coat had impact on the properties. As the thickness of bond coat increased, the shear bond strength, resistance to thermal shock and resistance to impact decreased.
随着陶瓷层厚度的增加，涂层的抗热震性能、抗冲击性能下降，隔热性能上升。 - But, they do have several obvious advantages over the other fiber performs such as woven and braided fabric reinforced composites, including mass productivity, low fabrication cost, superior resistance to impact, and high ability to conform to complicated contours.
但是，相对于编织物和机织物等一些其他类型的增强复合材料，经编针织复合材料的优势也非常明显，如生产率高，成本低，耐冲击，适应复杂形状的能力等。